This page:


/

Changing The Oil And Oil Filter On A Fiat Panda 0.9 Twin Air (4x4)




Take care when removing the undertray/engine guard as it is quite robust and surprisingly heavy (weighs 7.6kg).

Oil filter 55224598, sump plug washer 10261060 and engine oil 13893701

Workshop time: 30 mins


If you would like to book your Panda Twin Air into the workshop the price of this service is £121.50


border='1'

Unscrew the oil filler cap.

border='1'

Undo the x2 10mm engine cover bolts.

border='1'

Unclip the turbo air intake pipe.

border='1'

Undo the 10mm bolt to the bracket holding the air intake pipe to the air filter box and remove the engine cover.

border='1'

If you're facing the engine the oil filter housing is at the back of the engine on the right side.

border='1'

Undo the 24mm oil filter housing cap and remove.

border='1'

Undo the x8 10mm bolts to the undertray/engine guard.

border='1'

The sump plug is 17mm.

border='1'

Drain the engine oil into a suitable container.

border='1'

Replace the sump plug and use a new sump plug washer.

border='1'

Remove the old oil filter from the housing cap...

border='1'

...and replace the old seal.

border='1'

Insert the new oil filter. When fitting the filter back into the housing on the engine, the lug on the bottom of the oil filter needs to align.

border='1'

Replace the rest of the parts you have removed, pour in the recommended amount of oil then check the oil level and top up if necessary.

Related Links: Fixed price servicing

Contact Us | Terms & Conditions | © Jamie Porter Ltd