This page:


/

Replacing The Oil And Oil Filter On A Fiat 500 1.2 8v






There's no undertray to remove on this model.

Oil filter 55230822 and K Pure Energy oil.

Workshop time: 30 mins



If you would like to book your 500 1.2 into the workshop the price of this service is £93.16




border='1'

Undo the 12mm allen key sump plug...

border='1'

....and drain the oil into a suitable container.

border='1'

Unscrew the old oil filter. Before fitting the new one clean the surface of the oil filter housing then smear clean engine oil over the seal of the new oil filter. Now refit the tapered sump plug.

border='1'

Unscrew the oil filler cap...

border='1'

....and pour in about 2.8 litres of the recommended engine oil. Screw the cap back on.

border='1'

Start the engine briefly to circulate the oil.

border='1'

Pull out the dip stick, wipe it, put it back then pull it out again and check the level of the oil. Repeat this at least once again and top up if necessary.

Contact Us | Terms & Conditions | © Jamie Porter Ltd