Replacing The Auxiliary Belt On A Fiat Tipo 1.3 Diesel

Unscrew the x2 Phillips screws along the right edge of the undertray.

Undo the 17mm wheel bolts and remove the front, right wheel.

Unscrew the x3 Phillips screws to the front corner of the wheel arch liner.

In front of the shock absorber undo the plastic nut to the side face of the wheel arch liner.

You should be able to peel back the wheel arch liner far enough to gain access to the auxiliaries.

Using a long handled 15mm ring spanner rotate the auxiliary tensioners pulley bolt clockwise to release tension on the belt. Remove the old auxiliary belt noting the way it's routed. Replace the new belt in the same way then replace all parts.